They let us on a Real Racetrack! Power Wheels Hot Laps With PUBG MOBILE
Thanks again PUBG Mobile for sponsoring the video. Click the link http://www.inflcr.co/SH1wZ and join the 600+ million players for free! They let us bring our custom Power Wheels dirt bike engined go karts on a real race track! The Camaro is powered by a Polaris 500cc sport quad engine and the Jeep a CRF450 dirt bike engine. Both builds are fully custom built and the build series can be found here.
Camaro Build Series https://www.youtube.com/watch?v=W3vRZRXPtDk&list=PLL5hF_waT6s4pSvh07EN5ng02ZyvfWDk
Jeep Build Series https://www.youtube.com/watch?v=jwY-bFNw7Os&list=PLL5hF_waT6s7B7k1Yuoa-OTAz6Lv4x0I1.
We had a blast taking our custom go karts on stateline speedway! there was snow on the track that caused us to go home early but once the weather gets better we will be back with our builds and do more drifting, drag racing and hot laps!.
GHPC 2 Our new channel https://www.youtube.com/channel/UCDJo4LLCjlbupu1DMgvNlDw?
Merch https://www.grindhardplumbingco.com/.
Music From Artlist (A site with thousands of Royalty Free Tracks For YouTube Videos) https://artlist.io/artlist-70446/?artlist_aid=GrindHard_579&utm_source=affiliate_p&utm_medium=GrindHard_579&utm_campaign=GrindHard_579.
Clinton’s Channel https://www.youtube.com/channel/UCDCqxFglNKQ4oiQEjCkRTew.
Marshall FPV https://www.youtube.com/channel/UC2WJ89HB9vwdQ761ZOxNsAw.
Michael @MIKEYGRIBBIN on instagram.
Fan contact info.
PO Box 2370.
Sandpoint, ID 83864.
USA.
grindhardyewww[AT]gmail.com.
Merch inquiries.
grindhardmerch[AT]gmail.com.
Other inquiries grindhardplumbingco[AT]gmail.com.
For business inquiries please contact Colin GHPC@solaromgmt.com
Видео взято с канала: Grind Hard Plumbing Co
500cc Transforming Power Wheels Build Subaru Powered
Time to get building on our Fuji Heavy Industries 500cc powered Camaro Go Kart. In this video we build a custom tube frame for the Camaro SS and plan out where our transforming air ride suspension will be placed..
Magnetic Koozies! https://www.grindhardplumbingco.com/.
PART LIST https://platinum-fox.squarespace.com/builds-1/2019/8/30/500cc-camaro-power-wheels.
Music Akina Boy Shakespeare’s Summer https://www.youtube.com/watch?v=gC-p4wGYxtU.
Music from Epicdemic Sounds (A site with thousands of Royalty Free Tracks For YouTube Videos) http://share.epidemicsound.com/wHcdc.
Fan contact info.
PO Box 2370.
Sandpoint, ID 83864.
USA.
grindhardyewww@gmail.com.
Merch inquiries.
grindhardmerch@gmail.com.
Other inquiries grindhardplumbingco@gmail.com
Видео взято с канала: Grind Hard Plumbing Co
4×4 Power Wheels Ford Bronco Go Kart Build!
We’re building a 4WD power wheels go kart! Starting with a classic Ford Bronco power wheels body, we’re building a four wheel drive go kart (dual straight axle 4×4) with a powerful and compact Tillotson 228cc engine. The goal is light weight, and somewhat low center of gravity. The 23 horsepower 228cc engine makes can easily send a mini bike into the 70mph zone, so we’re confident that this project will be capable of rock crawling torque and 4wd suspension, but still having a top speed of 40-50MPH..
Thanks for Watching!.
.
Facebook: https://goo.gl/VR6mh2.
Instagram: https://goo.gl/PqOIo3.
.
-Go Power Sports Parts Used in Today’s Video-
Tell them CarsandCameras sent you at checkout:
Tillotson 228 engine: https://bit.ly/2zQCG3w.
Super 30 series torque converter (with Juggernaut): https://bit.ly/3ahxWlD.
Live axle kit: http://bit.ly/359NJ1J.
420 racing chain: http://bit.ly/2l6zklT.
4×4 live axle hub: http://bit.ly/2WZFW2c.
8 inch diameter wheels: call for availability.
Racing seat: http://bit.ly/2x8tYZG.
8” brake disc: https://bit.ly/2XUbIkp.
Engine mount: https://bit.ly/3bCM8VO.
HD shocks: https://bit.ly/3a8FTHU.
Reverse Kit: https://bit.ly/3ixLNqK.
Steering: http://bit.ly/305HwSN (call for availability).
Steering wheel: http://bit.ly/2YYHH1A.
Springer spindle: http://bit.ly/2sowOv3.
420 split sprockets: https://bit.ly/3kFMeRx.
Go Power Sports: https://goo.gl/c2Tz6o.
NEW MERCH: http://www.cars-cameras.com/.
Equipment we use: https://www.amazon.com/shop/carsandcameras.
.
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY..
.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Видео взято с канала: CarsandCameras
Power Wheels Gets MODDED with Milwaukee Drill Battery Upgrade
Power Wheels battery easy upgrade how to. We take a milwaukee 18v drill battery and hook it up to a power wheels. be prepared for lots of drifting..
#powerwheels #moddedpowerwheels.
Battery adapter for.
Milwaukee Drill.
https://amzn.to/32YZz0X.
DeWALT Drill.
https://amzn.to/30PUgOV.
****GET YOUR MERCH****.
https://teespring.com/stores/jd-joyridetv.
.
JUST SEND IT (For anyone that wants to send us stuff).
PO BOX 157.
Middletown VA 22645.
.
Keep up with me between uploads on my social media….
.
IG: @jd_joyridetv.
FB: JD Joyride TV.
.
#TeamLaura.
IG: jd_joyridetv_wife.
.
Bex Russ.
FB: BexRussModel.
IG: bex.russ.
Tw: Bex.Russ.
.
BIG THANKS TO MY EPIC SPONSORS!!!!.
.
Get your Octane Booster.
BOOSTane.
save 10% use code: jdjoyride10.
https://boostane.com.
.
BMR SUSPENSION.
www.bmrsuspension.com.
Save 7% Use Code: JOYRIDE7.
.
ShockerRacing:.
IG: @shockerracing.
FB: ShockerRacing.
.
Laid Not Sprayed:
IG: @laidnotsprayed.
FB: LAIDNOTSPRAYEDVINYLWORKZ.
.
PowerStop Brakes.
AUXBEAM.
.
YouTube Crew:
Shocker Racing.
https://www.youtube.com/user/shockerracing.
ALL CARS UNITED.
https://www.youtube.com/channel/UCL3-7O31m0tKqFno2NBropg.
DerekBaranProductions https://www.youtube.com/channel/UCMsfVU4DobbtQtmxYuX4cdA
Видео взято с канала: JD JoyrideTV
Motorized f150 Power Wheels Returns! Sister Drift Sessions
We up the power output on the motorized ford f150 truck! Install a Cvt system and make a jackshaft system for the ultimate torque. Stay tuned and see if my sister can drift..
��Thank you for watching!��.
Gopowersports: https://www.gopowersports.com/.
Tell them Vasily sent you.
electric start 212cc engine: https://www.gopowersports.com/electric-start-212cc-tillotson-hemi-engine/.
30 series cvt: https://www.gopowersports.com/comet-tav-30-75-torq-a-verter-12t-spkt-for-35-chain/.
15hp tage two kit: https://www.gopowersports.com/stage-2-212cc-tillotson-performance-kit/.
engine plate: https://www.gopowersports.com/predator-engine-mount-212cc-301cc/.
front wheels: https://www.gopowersports.com/145×70-6-v-tread-floater-wheel-assembly-complete-with-5-8-sealed-bearings-set-of-2/.
rear tires: https://www.gopowersports.com/16×6-8-v-tread-midxrx-80t-front-tires-rear-midxrs-tires/.
steering kit: https://www.gopowersports.com/go-kart-steering-kit-complete/.
Steering wheel: https://www.gopowersports.com/mini-mid-steering-wheel/.
pre-bled system: https://www.gopowersports.com/80t-mid-x-brake-kit-6-000-000/.
1″ axle: https://www.gopowersports.com/axle-54-1-diameter/.
Aluminum fuel tank https://www.gopowersports.com/10-gas-tank/:.
212cc intake kit: https://www.gopowersports.com/22mm-mikuni-carburetor-performance-kit/.
Follow me on Instagram @vasilybuilds.
https://www.instagram.com/vasilybuilds/.
New merchandise: https://teespring.com/stores/shopvasilybuilds.
For all inquires email me vasily1fab[at]gmail.com.
��PayPal Donation Link: https://goo.gl/ZxbUeG.
—
�� Music used form epidemicsound.com
Видео взято с канала: Vasily Builds
Power wheels plastic tire upgrade-How To add TRACTION
Due to popular demand we are introducing step by step how to videos. Does your ride on just sit and spin? Are you tired of replacing expensive tires every couple weeks? Does the crunchy noise of the hard plastic on concrete send a shiver up your spine line nails on a chalkboard? Then we have the modification hack for you. With basic materials from your local hardware store we show you how to add the perfect traction compound for very low cost (under $20) and a few bolts and an old inner tube to hold it all together while the glue dries.
Видео взято с канала: CKC Garage
Power Wheels gets MODDED with Rubber Tires and Wheelie bars
Power Wheels gets modded with rubber tires and wheelie bars along with Milwaukee drill battery upgrade.
Power Wheels gets Modded with Milwaukee Drill Battery Vid.
https://www.youtube.com/watch?v=A34jVGXZpdI.
Dad Surprises Son with Mustang GT500 power wheels for his Birthday.
https://www.youtube.com/watch?v=Q17MwF08zFs&t=1s.
#powerwheels #moddedpowerwheels.
****GET YOUR MERCH****.
https://teespring.com/stores/jd-joyridetv.
.
JUST SEND IT (For anyone that wants to send us stuff).
PO BOX 157.
Middletown VA 22645.
.
Keep up with me between uploads on my social media….
.
IG: @jd_joyridetv.
FB: JD Joyride TV.
.
#TeamLaura.
IG: jd_joyridetv_wife.
.
Bex Russ.
FB: BexRussModel.
IG: bex.russ.
Tw: Bex.Russ.
.
BIG THANKS TO MY EPIC SPONSORS!!!!.
.
Get your Octane Booster.
BOOSTane.
save 10% use code: jdjoyride10.
https://boostane.com.
.
BMR SUSPENSION.
www.bmrsuspension.com.
Save 7% Use Code: JOYRIDE7.
.
ShockerRacing:.
IG: @shockerracing.
FB: ShockerRacing.
.
Laid Not Sprayed:
IG: @laidnotsprayed.
FB: LAIDNOTSPRAYEDVINYLWORKZ.
.
PowerStop Brakes.
AUXBEAM.
.
YouTube Crew:
Shocker Racing.
https://www.youtube.com/user/shockerracing.
ALL CARS UNITED.
https://www.youtube.com/channel/UCL3-7O31m0tKqFno2NBropg.
DerekBaranProductions https://www.youtube.com/channel/UCMsfVU4DobbtQtmxYuX4cdA
Видео взято с канала: JD JoyrideTV
Нет похожих статей
Harbor Freight Anti-Fatigue Roll Mat cut to size and applied to tires. A couple layers would absorb bumps a little better. Some cushioning inside the car for bump comfort/protection. RC car parts are the next level of power: brushless motors and performance batteries.
I just found your You Tube channel,. you guys are nuts. Those cars and the scooter are great! Here is a new challenge…..Gravity Cars. No power at all. Just good bearings. good suspension, good tires and brakes. And maybe some thought to streamlining. These guys are going downhill at up to 85 mph. Check it out.
It works, just gonna overheat the motor. Did it to my son’s quad. Motor lasted 2 uses. If you’re gonna go through all this just buy another of the same bats, run in series and spend $40 on a motor that can handle it
So im new to the channel, (ive seen the Barbie Mustang on Facebook and stuff) but Ethan(i think) looks like Chris Masterson, and the camera guy(Colin? Edwin?) (as soon as i posted this comment I went back to the «about» section on the channel, and found your name, i think/in a future video it when you guys talk about Last Past it says Edwin lol) but you look like Tom Payne(especially his character from the TV show Prodigal Son(the characters name is Malcolm Bright) but yeah its really trippy on how closely you guys look Chris M and Tom P. But love these videos, can’t wait to watch more vids
If you want smooth, safe low end transition without giving up total top speed, I recommend you use a cam [you might maybe could get one from an old used compound bow, or else purchase one brand new from an archery supply shop] so that on the bottom end of the travel the short end of the cam takes up less cable, which means opening the throttle less aggressively giving more control and less of a jerky acceleration, but then at the same time, on the top end, the cam takes up more and opens the throttle wide open, giving it the best of both worlds! (_^)-b
The oil dipper broke because you didn’t put a spring on the governor shaft, which meant that the oil dipper while turning with tha conrod smashed into the governor arm. That’s also why it’s bent. But awesome video tho, keep it up!
Hey Vasily!!!, Stop laying down on the job! (When you were welding.)
You a «Great» big brother!!! Never ever change that love for your family!!!
And I’m gonna go out on a limb and say that «Lil’ Sis» was scared and having a blast at the same time burning donuts!!! «The proof is in the pudding»… Just watch her face as she’s riding her whip. (Follow me now) Her smile was so big that if she didn’t have ears the top of her head would have fell off!!!
Thanks for the awesome vid and keep makin’ «Lil’ Sis» scream with excitement!!!
NO…NO…NO…Bet ya you strip the GEARS…didnt ya.
I told you to USE GARDENING DIVIDER ( 4-5mm thick plastic) to prevent the wheels
from wearing and will still power/slide.
you can even make it go FASTER..if you know what you’re doing.
3665 BURSHLESS has the same SHAFT size as 550 brush.
it can handle 3-4s…but it’s going double the speed/torque as 550 brushed.
i can easily mount 4082 brushless motors…but it’ll strip the stock gears..(or hurt the kids).lol
I really dig how you guys don’t just go by the book. Like the suspension solution, the cage being part of the cooling, that’s all stuff they’d never do in other shops, because «you can’t do that».
Keep with that spirit!
Hey man been doing collision repair for more ten years dnt plastic weld it get your self some epoxy glue it is strongest glue out there we glue quarter panels on with it in body shops u can get it at auto zone or any auto shop lile it just give it alittle scuff and a alcohol wipe then glue it it literally will snap before the glue fails. Trust me u would be super happy with the outcome. Great build and your cool brother to your sister.
if you remove the governor you do not want to use the stock flywheel. me and my dad learned from that. we had built a motor for my drift trike and decided to take out the governor. when we began to drive it fast the flywheel blew up and destroyed the motor. just a warning you will need to get a performance flywheel before you do anything else.
I was hoping to see it with 12V as the motor is most likely a 12V motor but undervolt too 6V as that is safer for children. It would definitely be better an it didn’t matter if you burnt the motor as you obviously don’t need it.
The plastic should be TPO, and just possibly HDPE, but you should be able to get the info from the manufacturer, it might even be in the literature that the product originally came to you with [assuming that it did, in fact, come with any literature] ( ‘w’)/
A color matching might be impossible, but you should be able to softly scuff your replacement plastic and paint over it with plastikote or plastic ready paints like Valspar, Krylon and Rustoleum.
Admittedly, color matching might be a challenge, so you might consider simply painting the whole machine when you have the needed parts made. ( ‘w’)/
it wont climb a slight incline in front of shop door, so of course you’ve got to drive it off of the side of the bridge into the crick. lol! happy b-day there ike! may you live as long as you want, and never want as long as you live.
Hey I have a Honda gx390 13hp. So I wanted to see how it looked inside the vavle cover turned the torque to see the rocker ATMs move I put the vavle cover BK on loosen the bolts on the the engine to move it forward to make the chain a little tighter cause it had alot of slack. When I turned it on the belt was getting messed up real bad what’s gng on
Run 1 had 2 kids, run 2 had 1, run 3 2 kids again. Wonder what run 3 would have been like with 1 kid. Also hot wheels use to make a radar gun if you wanted to try that and see how fast they are actually going. Thx for the vid
My kid as a mazarati that seems to have all the bells and whistles of an actual including “hydraulics” Bluetooth am and fm mp3 super bright leds all around and radio control for the parents. Oh and can’t for get the powered open and closing doors.
I love your channel guys I’ve been watching for a long time! You guys have inspired me to start my own Channel please check it out maybe like And subscribe give me a shout out it would mean alot to me and I will definitely give you guys plenty of future and I was hoping maybe you can help me build a good Mud Motor I love you guys keep up the good work!
Been anxious to see someone do an F150 Raptor PW. That seems to be big enough for ya’ll to do your thing. DON’T make me build one because all of you will be very mad if not envious. Will use tech like CAD CAM and weight saving design and materials.
I stumbled across your channel by accident, and now I have to check out the rest of this build and your other projects.. All of this is right up my alley as a fellow Designer/Builder/Customizer, only currently I do my stuff in Radio Controlled.. #customcrawlerz
Off topic question… if you take a cast iron flywheel and put a steel strapping band on it will that prevent the flywheel from exploding at high RPMs?
Maybe weld the band on so the coil can pickup the magnet as it goes by.
hello guys i am wondering if you know how to fix a riding lawn mower that when you move try mowing it shuts off so it technically has no power if you put your foot of the brake and transaxle it shuts off also
Be careful not to over discharge the battery because it could damage the battery and make it to where the Milwaukee charger will no longer charge the battery. I recommend you get some sort of voltage cutoff board to put in there to prevent over discharge of the battery.
I used wheels from harbor freight with bearings in them. Bushings to go from 7/16 axle to 5/8 wheel bearings…. next i am upgrading to a 5/8 axle. A 3D printer is my best friend for axle drive parts!
Vasily,bro, you my friend are an awesome amazing big brother and I know that your Lil sister appreciates all that you are doing for her so keep up the GR8 work brother, we’re looking forward to seeing you guys riding beside each other!!!!!!
P.s. love all that you do for the channel so keep up the great work
My brother from another mother!
I love the ingenuity of your projects. The type of engineering only found in fabrication. I remember when I first incorporated a live axle rear end in a mini bike I built years back. A very solid design. Good work!
Another challenge, Radio Flyer wagons seem to be really catching as low riders, rat rods and parts chasers at rod shows. Time for a 500cc radio flyer? I would advise staying away from stock wagon steering.
Just my opinion.
If it were me riding it I’d go with the original set up with the upgraded engine and do a couple other mods, like putting a speaker to listen to music, and ride to school with it every day, and lock it up, some how…. lol
Any way, your a VARY good brother, and a excellent person. Stay safe homies!!
i like how you re doing the motor mount and attaching frame keeping things square brilliant idea you are good after all you are the power wheels, king glad to see you got power sports helping you earned their respect and deserve it congrats and long may you build great video good to see moto mule getting noticed i just love this stuff
Incredible progress! It’s also cool to see you continue to refine and master your craft. Love it.
I would love it if you shared a link to your welder, tube bender, tube notcher, etc. Im a builder in the making, and you guys are my inspiration.
Just a quick idea. You should make that table have adjustable height. Maybe you could use the mechanisms from «ratcheting» jack stands (not the kind with a pin). So you could pull the whole table up higher at once, and take the time to lower it when you need to. You could even weld a bar to each side (connecting two of the jack stand release handles) to make lowering it quicker and easier. That would make a badass welding table. Maybe it wouldn’t work as good as I’m thinking, but it’s a sick idea on paper! Lol
Be careful of evil ghost networks be on the lookout for people who has a computer and a lot of extra peripheralsit usually means they’re running another Network there and hopefully people log onto it so they could steal their passwords and stuff
I just realized the beauty of what you guys do is made possible by the bond you both share. Your like brothers. You wouldn’t be having half the fun your having if you didn’t have each other to do all this with.
That’s where the magic is. That you have each other to go through adventures together.
God bless and be careful.